
6.4.1
Zero Calibration
To perform Zero Calibration, click on
Zero Calibration
. Then follow the instruction on how to calibrate, then
click
Ok
.
Figure 16.
6.4.2
Slope Calibration
To perform Slope Calibration, click on
Slope Calibration
. Then follow the instruction on how to calibrate,
then click
Slope Calibration
.
Figure 17.
6.4.3
4-20mA Span
To perform 4-20mA Span, click on
4-20mA Span
. Then follow the instructions provided to alter the 4-20mA
output span of the sensor, then click
Set 20mA Span
. Each sensor format will have a maximum 20 mA range
allowed. 4-20mA Span setup must be maintained within the limit of its respective sensor.
ST-730 Series User Manual
| +1 (866) 203-8397
12