Pyronix Vocaliser, Руководство по установке, Страница: 17 / 32

VOCALISER INSTALLATION MANUAL
RINS119-5 Page: 15
7 . 2 T h e Ou tp u t 1 S ta t e ( F L T )
At default the FLT output is programmed as negative applied. The following states can be
chosen for this output:
State Output Type “OFF State” “ON State”
1 Negative Applied No Voltage 0V
2 Negative Removed 0V No Voltage
3 Positive Applied No Voltage 12V
4 Positive Removed 12V No Voltage
5 Negative Logic 12V 0V
6 Positive Logic 0V 12V
7.2.1 Output 1 State 1 Negative Applied:
¾ Dial
#
for Negative applied for Output 1
¾ A ‘ BEEP’ will be heard
¾ Dial
#
¾ “ SAVED, PLEASE ENTER COMMAND ” will be
heard
¾
Dial
¾ a ‘ BEEP’ will be heard
¾
Dial
¾ “ SAVED, PLEASE ENTER COMMAND ” will be
heard. You will be returned to the engineer menu.
7.2.2 Output 1 State 2 Negative Removed:
¾ Dial
#
for Negative removed for Output 1
¾ A ‘ BEEP’ will be heard
¾
Dial
¾ “ SAVED, PLEASE ENTER COMMAND ” will be
heard
¾ Dial
¾ a ‘ BEEP’ will be heard
¾ Dial
#
¾ “ SAVED, PLEASE ENTER COMMAND ” will be
heard. You will be returned to the engineer menu.