Pyronix Vocaliser, Руководство по установке, Страница: 14 / 32

VOCALISER INSTALLATION MANUAL
Page: 12 RINS119-5
C H A P T E R 6 : I N P U T S ( 1 , 2 , 3 , & 4 )
The polarity of the inputs on the Vocaliser (see page 2, Vocaliser PCB) can be changed to
various different triggers.
6 . 1 T h e I n p u t s S ta te
There are four inputs on the Vocaliser, at default these are programmed as negative applied.
To change this setting please follow the below instructions:
¾
Dial to change input 1.
¾ “ ONE ” will be heard.
¾ Enter the trigger type:
o
Dial for Negative Applied (default) or
o
Dial for Positive Removed or
o
Dial
#
for Negative Removed or
o
Dial for Positive Applied
¾ “ SAVED” will be heard.
¾
“ PLEASE ENTER COMMAND ” will be heard
returning you to the engineer menu.
¾ Dial
#
to change input 2.
¾ “ TWO ” will be heard.
¾ Enter the trigger type:
o
Dial for Negative Applied (default) or
o
Dial for Positive Removed or
o
Dial
#
for Negative Removed or
o
Dial for Positive Applied
¾ “ SAVED” will be heard.
¾
“ PLEASE ENTER COMMAND ” will be heard
returning you to the engineer menu.