Pyroclassic Fires Operating Instructions | Updated July 2016 | V.2 | 3
WATER HEATING
Water heating is by
low pressure thermosyphon
, maximum operating pressure 10 Bar.
The capacity of the wetback is 0.5 litres.
Excess heat from the wetback boiler to the domestic hot tank should be dissipated using a ‘heat leak’ radiator. A
drain-cock must be fitted in the lowest part of the system. See Hotflow wetback installation instructions
included with the wetback for more information. A copy of these instructions can be downloaded from
Minimum safe distances from unprotected combustible materials:
Back - 350mm, Side - 480mm (See technical specifications sheet on protection measures).
This appliance is not suitable for use in a shared flue system and should not be operated in a room
with another combustion heater.
WARNING: There must not be an extractor fan in the same room or space as the appliance as it may
cause the stove to emit fumes into the room.
