pyrexx PX-AR, Руководство по эксплуатации, Страница: 33 / 40

Operating Manual: PX-AR Alarm Relay
33
EN EN
20 sec.
7 Restore default status
(1) To set the PX-AR into default sta-
tus, press and hold the configura -
tion button for approx. 20 seconds.
During these 20 seconds, the LED
produces various optical signals at
different intervals:
•
At the start, a continuous
yellow interval signal
•
Then a slowly flashing
yellow interval signal
•
Finally a quickly flashing
yellow interval signal
(2) Now release the button
(3) The Status-LED
lights up green briefly
5
The device is now in the default
status
The default status can only be re-
stored if the PX-AR is in the status
that was given, when the PX-AR was in-
tegrated into the radio group.
Example: When the PX-AR was inte-
grating and the contacts were bridged,
during the reset, the contacts must also
be bridged.
1 2 3 4