pyrexx PX-AR, Руководство по эксплуатации

Страница: 32 / 40

Operating Manual: PX-AR Alarm Relay
32
EN
5
The PX-AR is now successfully
integrated into the radio group.
f
To end the learning mode, press the
configuration button briefly once,
or wait for 10 minutes.
The PX-AR cannot perform
a connection test automati-
cally. However, you can use
the connection test function
of a PX-1C to test the ra-
dio connection to the PX-AR.
To start the connection test
(1) Press and hold the test/stop
button on a PX-1C for approx.
12 seconds.
(2) All the participants in the radio
group will now produce a signal
one after another. The PX-AR
also acknowledges the connec-
tion test with a flashing red LED.
5
The connection test is then
successfully ended.
5 Connectivity
With other radio group
participants:
•
You cannot set a radio group into
learning mode via the PX-AR!
•
Using the PX-AR, the alarm
of a radio group cannot
be muted or ended.
6 Connection test