background image

1

PYRAMID 915MHZ WIRELESS RF TRANSMITTER & REPEATER USER GUIDE

OVERVIEW

This Product is part of a centrally controlled
messaging system.

A typical system consists of one or more
servers that transmit time and other informa-
tion in wired or wireless format. The servers
can synchronize to various time standards.
The servers can get their time from other
Pyramid servers, NTP via the Internet, your
Intranet, and GPS. 

The servers transmit data wired or wirelessly
to various devices including, but not limited
to:

(NOTE: In some installations, receivers with a 
transmitter option may be enabled to become
low power repeaters.)

INSTALLATION

1.

Choose a location for the transmitter.

• For buildings less than 100,000 sq. ft.,

locate the transmitter centrally.

• For multi-story buildings, locate the

transmitter on a middle floor.

• For buildings greater than 100,000 sq.

ft., please consult with your dealer or
sales representative.

• The transmitter should always be

indoors, in a dry location.

• The location should be away from

people.

• Under no circumstances should the

transmitter be placed where people
can regularly come within 20cm of it.

2.

Attach the supplied antenna by rotating
in a clockwise direction.

3.

Place or mount the transmitter so the
antenna is standing vertically. This is
required for proper operation.

4.

Connect the Ethernet port to a comput-
er or a network. The transmitter will be
configurable from anywhere on the
local network.

5.

If a GPS receiver is to be used as a time
standard, install and connect as
described in the GPS documentation. 

6.

Connect the power supply to the trans-
mitter and to any standard wall outlet.

(NOTE: Using anything other than the included Power
Supply or included Antenna in a vertical orientation
may be unsafe, cause improper operation, and 
violates FCC regulations.)

RECEIVES DATA 

DEVICE

WIRED OR WIRELESSLY

Analog Clocks 

Time  

Digital Clocks       

Time, Date, FirE, 
Code Blue

Message Boards 

Time, Date, 
Informational and 
Emergency Messages

Time Recorders

Time, Date, Setup 
Information

Bell Systems

Bell Signaling

Содержание 915 MHZ










Отзывы: