background image

5

PYRAMID 915MHZ WIRELESS RF TRANSMITTER & REPEATER USER GUIDE

EQUIPMENT PRECAUTIONS:

•  Antenna should be connected and oriented vertically before power is applied.  

•  Using other than the provided antenna is prohibited by FCC regulations.

•  There are no serviceable or adjustable parts inside the case of this transmitter.

•  Opening the transmitter case voids all warranties.

•  Any modifications to the transmitter, antenna, or stated operating conditions violates FCC

regulations and may be detrimental to health or safety.

REGULATORY

FCC (FEDERAL COMMUNICATION
COMMISSION) INTERFERENCE STATEMENT:

This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference in a residential installation. This
equipment generates, uses, and can radi-
ate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interfer-
ence to radio or television reception, which
can be determined by turning the equip-
ment off and on, the user is encouraged 
to try to correct the interference by one of
the following measures:

1.

Reorient or relocate the receiving anten-
na. Increase the separation between
the equipment and receiver.

2.

Connect the equipment into an outlet
on a different circuit from which the
receiver is connected. 

3.

Consult the dealer or an experienced
radio/TV technician for help. 

FCC CAUTION: 

Any changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user’s authority to
operate this equipment

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: 

1.

This device may not cause harmful 
interference, and

2.

This device must accept any interfer-
ence received, including interference
that may cause undesired operation.

RF EXPOSURE INFORMATION:

The radio module has been evaluated
under FCC Bulletin OET 65C (01-01) and
found to be compliant to the requirements
as set forth in CFR 47 Sections, 2.1093, and
15.247 (b) (4) addressing RF Exposure from
radio frequency devices. This model meets
the applicable government requirements
for exposure to radio frequency waves.

Содержание 915 MHZ










Отзывы: