Pylontech UP2500, Руководство по эксплуатации продукта

Страница: 8 / 22

8 / 22
18BPSV0804
2.3 Equipment Interface Instruction
This section details the front panel of the interface functions.
UP2500 Product Front Interface
Power / SW Switch
Power Switch: ON: the battery standby, no output. OFF: turn off the battery completely.
SW Switch: Press 2s to turn on or turn off battery
SOC
SOC light: 4 green LED to show the battery ’ s current capacity.
Alarm
Alarm light: YELLOW LED to show the battery has alarm, Combine with SOC LEDs to show which
kind of alarm in detail. Please check below table ‘ LED Indicators Instructions ’ for the detailed
definition.
Protection
Protection light: RED LED to show the battery is under BMS protection. Combine with SOC LEDs
to show which kind of protection in detail. Please check below table ‘ LED Indicators Instructions ’
for the detailed definition.
LED Status Indicators
LED Indicators Instructions
It`s important to check the detailed alarm/protection definition follow the below table for trouble-
shooting and maintenance service.
Condition
Prot
ect
ALM
100~
76%
75 ~
51% 50 ~
26% 25 ~
0%
Description
Turn off ● ● ● ● ● ●
All LED lighting until battery is Off.
Power off - - - - - -
Turn on ● ● ● ● ● ●
Flash once.
Idle ●
Current
≤
±0.1A;
Only current SOC status LED slowly flash.
Charge ●
Only current SOC status LED constant lighting on.
Float
charge
●●●●
SOC
≥
99%, 0.1A
≤
Current
≤
0.5A
Highest SOC status LED constant lighting on, rest
SOC LEDs flash per sec.
Discharge
100-76 ●●●● → 75 -51% ●●●
→ 50 -26% ●● → 25-0% ●
Residual SOC LEDs flash per sec.
Soft start - - ● ● ● ●
All SOC LEDs constant lighting on, pre-charge
circuit is working.