Pylontech PowerCube-X1, Руководство по эксплуатации

Страница: 26 / 44

EU20PIXV0501 22 / 38
X1/X2s uses CAN cascade communication mode. The communication between the MBMS and
the BMS of 1
st
PowerCube-X1/X2 uses CAN communication mode.
CAN Communication Mode between MBMS and BMS Cable Diagram:
Note: The 1
st
PowerCube-X1/X2 should be installed nearest to the
MBMS.3.6.3 ADD Switch Setting (Address Assignment)
ADD Switch BMS is a 6 bit dial switches to manually distribute the
communication address of the battery system. Nether position is OFF,
means “0”. Upper position is ON, means “1”. 1
st
bit to 5
th
bit is for address,