9
REMOTE TRANSMITTER LAYOUT
Each LCD transmitter button has two
operating modes: standard and level shifted.
Pressing a transmitter button for less than one
second activates the standard function
associated with that button (such as arm or
disarm). Pressing a button for more than one
second activates the level shift feature, then
plays a chime and vibrates to signal the level is
shifted. While the transmitter is level shifted,
pressing transmitter buttons 1-4 accesses
another level of commands providing expanded
operation.
The basic operation of the optional 2-way LCD
transmitter is the same as the standard 4-
button transmitter, with a few added features.
The built-in LCD display provides visual
confirmation of system operations and status.
After a function such as arming is selected, the
LCD display will show confirming icons to
indicate that the function has taken place.
Additionally, the LCD display shows any
intrusion attempts as they occur, and indicates
the triggered zone. In addition to LCD display,
the 2-way transmitter also provides audible and
vibration alert in case the display is out of view.
And, for night-time use the LCD is equipped
with a backlight feature which is activated by
pressing button 5.
SYSTEM STATUS RECALL
Real-time system status can also be recalled at
any time by pressing transmitter button 3 for
less than one second. The system’s current
status will be shown on the LCD display.
RANGE INDICATION
The LCD display has an antenna icon that
flashes every 4 seconds while the system is
armed, to indicate the transmitter is in-range of
the vehicle. 60 seconds after disarming the
antenna icon will stop flashing.
If the
transmitter is not in-range of the vehicle when
pressing a button, a low pitched audible alert
will be heard.
LOW BATTERY
When the transmitter battery is in need of
replacement, the display will show the battery
icon. Replace with a fresh AAA alkaline battery.
BUTTON LOCK
The transmitter is equipped with a button lock
feature to avoid accidental feature activation
while in a purse or pocket. To lock the buttons
press button 1 and button 5 together. To
unlock the buttons press button 2 and 5
together.
5-Button 2-way
LCD Transmitter
OPTIONAL 2-WAY TRANSMITTER WITH LCD DISPLAY
OPERATING INSTRUCTIONS
Button 1
Button 3
Button 2
Button 4
Button 5
