Pyle PWD250, Системное руководство

Страница: 24 / 24

24
© 2004 64-72.50, 2/04 Rev. 1
Yellow/Black Auxiliary output (-) 500mA
Blue Dome light output (-) 500mA
Blue/Black Door trigger input (-)
Yellow Ignition input (+)
Orange/White Trunk input (-)
Orange/Gray Hood input (-)
Blue/Red Door trigger input (+)
Gray Siren output (+) 3A
Green/Black Parking light output (+ built-in relay)
Green/Yellow Parking light output (+ built-in relay)
Red +12V Battery input (+)
Orange/Violet Brake input (+)
Black/Red Lock relay normally open 87
Blue/Black Lock relay normally closed 87a
Blue Lock relay common 30 [10A fuse]
Black/Red Unlock relay normally open 87
Green/Black Unlock relay normally closed 87a
Green Unlock relay common 30 [10A fuse]
LED
Antenna cable
Not Used
3-Pin Data-Link cable
Valet switch
Ground
Optional 12V output
Optional sensor instant trigger input (-)
Optional sensor warn input (-)
Black Ground (-)
Black/Yellow Starter defeat/anti-grind output (-) 500mA
2-Pin Shock Sensor
module side view
ALARM MODULE WIRING DIAGRAM
Black/Red Remote start output (-) 500mA
Orange/Gray Hood input (-)
Yellow/Black Progammable output (-) 500mA
Green Ignition 2 output (+)
Gray/Black Tachometer input
Orange/Violet Glow plug input (+/-)
Data-Link Cable (links alarm and start module)
Pink Remote start input (-)
Blue Accessory output (+)
Black/Yellow (small gauge) not used
Yellow Ignition 1 input (+)
Black/Yellow Starter output (+)
Red +12V Battery input (+)
Black Ground (-)
OPTIONAL START MODULE WIRING DIAGRAM
RPM Signal LED
Starter Test Button
DIP Switches - Default setting is OFF position (see Remote Start Dip Switches)