However you decide to mount your camera please be sure that it has a clear field of
vision to the rear of your car.
10.
Now we will wire your rear view camera. Take the electric DC plug black wire with
one red wire and one black wire sticking out of the end. (pictured below)
11.
Attach the black wire to the vehicles metal body or any available ground wire.
12.
Attach the red wire on the small power plug to your vehicles rear reverse light’s
positive wire so that it receives a 12V electrical flow when the car is in reverse.
13.
Now take the long cable with the two yellow RCA plugs at each end, attach one end
to the yellow RCA plug on your camera and the other end to the yellow RCA plug on
the monitor’s wiring harness.
14.
You are finished! Please re-connect your cars battery.
