Pyle PICL36B, Руководство пользователя

Страница: 9 / 13

Setting the Clock
1. Press and hold the
The clock display will show “00:00” when first plugged in.
CLK SET
button more than 1 S, “24H” on display will begin blinking.
2. Press the
(SKIP)
buttons to select 12 hour or 24 hour format.
3. Press the
CLK SET
button again to save the hour format setting. The hour digit will blink.
4. Press the
Note: For 12 hour format, make sure the hour is correctly set, so that AM or PM is correctly displayed.
(SKIP)
buttons to adjust the current hour.
5. Press the
CLK SET
button again to save the hour setting, the minute digit will blink.
6. Press the
(SKIP)
buttons to adjust the minute.
7. Press the
CLK SET
button again to finish setting the time.
8
Setting the Sleep Timer
1. While playing the Radio, iPod / iPhone or Aux, press the SLEEP button once will turn sleep timer on,
SLEEP icon and the sleep time 120 minutes will light up on the LCD.
2. Press SLEEP button successively to change the sleep time to 90, 60, 30, 15, OFF minute.
3. When the desired sleep time is shown, leave it for 5 seconds and the sleep time will be set.
4. After the set sleep time has expired the music system will power off.
Note: In AUX mode, if the playing time of the external device is shorter than your selected sleep time,
the music will stop when the external device shuts off.
Setting the Alarm set
This unit provides two different wake up time: ALARM 1 and ALARM 2. You can choose to use them
independently or simultaneously:ALARM 1, ALARM 2 or both ALARM 1 and ALARM 2.To set alarm should
be done in power off only, follow below steps.
1. Press the
AL1 (AL2)
button, the AL1 (AL2) and sound source icons will start blinking.
2. Press the
(SKIP)
buttons repeatedly to change the sound source mode to BUZZ, (Radio),
(iPod / iPhone), when desired sound source is selected, press AL1 (AL2) button to confirm and hour
digit will blink on LCD.
3. Press the
(SKIP)
buttons to adjust the desired hour.
4. Press the AL1 (AL2) button again to save the hour then minite digit will blink.
5. Press the
(SKIP)
buttons to adjust minutes.
6. Press the
Note: For the 12 hour format, make sure the hour is set so that AM or PM is correctly displayed.
AL1 (AL2)
button to finish setting the wake up time.
Snooze/Repeat Alarm
Stopping the Alarm
After the alarm turns on, you can press the
During the alarming period, press AL.OFF button to shut off the alarm, and the unit will turn on the alarm again
at the same time on the follow day.
If press and hold AL1/2 button, AL1/2 icon will turn off and alarm do not repeat next day.
SNOOZE
button for a few extra minutes sleep (SNOOZE
icon will appear on LCD screen ). The alarm will stop for approximately 9 minutes and then repeat.
Snooze operation can be repeated several times if desired, but after one hour the alarm will not turn
"On" again.