Powering On
Press the POWER ON button, the detector will sound three frequencies of low, medium and high tones, the
liquid crystal dsplay shows the discrimination mode and the sensitivity.
*When the TARGET ID is not illuminated, that indicates the metal detector is in the 'ALL METAL' mode.
*Whichever 'DEPTH-SENS' segment is highlighted, that indicates the metal detector has detected an object
within that depth range. The approximate depth will be displayed
All Metal Mode
When turning on the unit, the detector will be in the 'ALL METAL' Mode. This is the general / typical
metal detector mode that provides indication of any recognizable and compatible metal object found.
Operat
ion
Indication
tone
LCD
TARGET ID
LCD
DEPTH-SENS
LCD Chart
Note
Turn on
Turn on
indication
Nothing
display
ed
SENS-3
is illuminated
If the height of the
metal sample from
the search coil is
changed, the
lighted segment
numbers of the
LCD depth cursor
will be changed
correspondingly.
Sweep iron nail
low tone
The IRON is
illuminated
and flicker
s
DEPTH-2
is illuminated
and flickers
Sweep 5¢ or pull-tabs
medium
tone
MID RANGE
is illuminated
and flicker
s
DEPTH-2
is illuminated
and flickers
Sweep 25¢
high tone
SILVER
illuminated
and flicker
s
DEPTH-2
is illuminated
and flickers
www.PyleAudio.com
