8
CONNECTION
LOUDSPEAKER CONNECTIONS
Caution:
To avoid damaging the speakers with a sudden high-level signal, be sure to switch the power off before connecting the speakers.
l
Check the impedance of your speakers.
Connect speaker with an impedance of 8 ohms or more. The amplifier
’
s red speaker terminals are the + (positive) terminals
and the black terminals are the
–
(negative) terminals.
l
The + side of the speaker cable is marked to make it distinguishable from the
–
side of the cable. Connect this marked side
to the red + terminals and the unmarked side is the black terminal.
l
Prepare the speaker cords for connection by stripping off approximately 10 mm or less (no more as this could cause a
short-circuit) of the outer insulation. Twist the wires tightly together so that they are not straggly.
1
2
3
1. Unscrew the knob
2. Insert the speaker cable.
3. Tighten the knob and secure the cable.
