13
BASIC OPERATION
Radio Operations
Automatic Tuning
1. Press the
Main Power On/Off switch
on the rear panel
first, then press the
Power On/Off
button on the front
panel to turn this unit on.
2. Press the
Tuner
button on the front panel or on the
remote control, then press the
Band
button on the
remote to select
FM
or
AM.
3. Press the
“
AUTO/MANUAL
”
button on remote control to
activate automatic selection. (Default mode is Manual
selection) (
Note
: Auto appears on the display.)
4. Press
and
TUNING -
to select the station you
want to listen to. When a station is tuned in, the tuning
process will stop automatically. (Automatic selection)
5. Press
TUNING +
or
TUNING -
again to select another
channel.
Manual Tuning
It is for selecting stations, which cannot be tuned
automatically (manual selection)
To tune a channel manually:
Skip step 3 in the above procedures. Each time the
or
TUNING-
button is pressed momentarily (0.5
second or less), the frequency changes by a fixed step: FM:
50 kHz steps; MW: 10 kHz steps.
Two FM modes available:
Press
ST/MONO
button on remote control to select Stereo
mode or Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
“
8
”
indicator lights on the display.
Mono
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced monaural, reducing
unwanted noise.
If
DISPLAY
button is pressed, the details of incoming source
will be displayed.
Preset Tuning
This facility is used to store FM, AM broadcasting from
channel 1 to15 respectively.
How to select preset stations
Press the
“
STATION buttons
”
(numbers)on remote control to
select a preset channel during the tuner mode.
Manual Memory Presetting
1. Press the
Tuner
button on the front panel or on the remote
control, then press the
Band
button on the remote to select
FM
or
AM.
2. Press the
TUNING +
or
TUNING -
buttons to select a
frequency channel you want to preset.
3. Press the
MEMORY
button briefly.
4. While the
“
MEM
”
indicator is lit, press
or
TUNING -
button to select a preset station. The station
number will be displayed on the screen.
5. Press the
MEMORY
button to confirm.
To store more stations, repeat steps 3 to 6.
