Setting Target Time Directly
To set Target Time, hold down the [M]
button in Chronograph Mode.
P r e s s t h e [ U ] / [ D ] b u t t o n t o s e l e c t
“TA” (Set Directly) and press the [M] button
to confirm.
In the Setting Display, press the [U]/[D]
button to select which check-point to be set.
Press the [M] button to confirm and go to
set Hour, Minute, Second.
Press the [U]/[D] button to increase or
decrease the value of Hour, Minute or
Second. Hold Down the [U]/[D] button can
change at a faster speed.
When the setting is completed, hold down
the [M] button to exit.
NOTE:
When there is no key-stroke for about
1 minute, the watch will exit the Setting
Display automatically.
+
+
+
+
+
+
Setting Target Time By Laps
To set Target Time, hold down the [M] button
in Chronograph Mode.
P r e s s t h e [ U ] / [ D ] b u t t o n t o s e l e c t
“TL” (Set by Laps) and press the [M] button
to confirm.
In the Setting Display, press the [U]/[D]
button to select which lap to be set.
User can set different target finish time for
different Laps or select ‘--’ to apply the same
target finish time to all Laps.
Press the [M] button to confirm and go to set
Hour, Minute, Second.
Press the [U]/[D] button to increase or
decrease the value of Hour, Minute or
Second. Hold Down the [U]/[D] button can
change at a faster speed.
When the setting is completed, hold down
the [M] button to exit.
NOTE:
When there is no key-stroke for about 1
minute, the watch will exit the Setting Display
automatically.
+
+
+
+
+
+
+
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[U]/[D]
[U]/[D]
Target Time
setting sequence
Target Time
setting sequence
Hold
[U]/[D]
Hold
[U]/[D]
Hold [M]
Hold [M]
Hold [M]
Hold [M]
Second
Second
Minute
Minute
Hour
Hour
Set Directly (TA)
/
Set by Laps (TL)
Set Directly (TA) /
Set by Laps (TL)
Select
Check-point
(#1~50)
Select Lap
(#1~50 or --)
5.2.1 Chronograph Mode
- Setting Target Time Directly
5.2.2 Chronograph Mode
- Setting Target Time by Laps
Increase or
decrease the
setting value
Increase or
decrease the
setting value
Increase or
decrease the
setting value
at a higher
speed
Increase or
decrease the
setting value
at a higher
speed
Lap and Check Point
For some training purposes, user may
set a Target for every check point or lap
in their run.
When they meet the check point, they
can press the [S] button to get the Lap
time / Split time.
Besides, this watch can calculate the
time difference between the Target time
and the actual time at the check point.
From these information, user can get a
briefer image of his/her performance
during their run.
Lap Time Display
+
In the Lap Time Display, if there is a
Target Time set for the Check-point,
the Time Difference will also be shown
on the screen.
+
The display will swap to show Lap
Time and Time Difference alternatively
for every 2 seconds.
+
+
+
+
Swap
every
2 sec.
Lap Time
Lap Time Display
Time Difference*
NOTE:
Time Difference will only be displayed
if target time is set (NOT 0:00:00) and lap no. Is
less than 50.
5.1.1 Chronograph Mode
- Time Difference Display
Actual Time
Taken at
Check Points
(Split Time)
Point 1
Point 1’
Point 2
Point 2’
Target Time at
Check Points
10
[S]
[S]
20
Start
Start
Overview
This watch provides 2 ways for user to set
their Target time:
Set Directly:
User can enter the Target
Time for check-points directly and the
watch will calculate the Time difference
for user.
Set By Laps:
User can enter the target
finish time for each laps
and the watch
will calculate the Target Time for each
c h e c k p o i n t a n d g i v e s t h e T i m e
Difference calculation.
IMPORTANT:
Even user enter the target
finish time for Laps, the Time Difference
calculated is NOT for single laps. It is the
accumulated Time Difference for all Laps.
+
&
&
5.2 Chronograph Mode
- Setting the Target Time
Target Time for Check Point A:
T.A. 1 = Lap 1
Target Time for Check Point B:
T.A. 2 = Lap 1 + Lap 2
Target Time
Target finish
time for Laps
T.A. 1
T.A. 2
Lap 1
Lap 2
A
B
Содержание PSWLMR30
Страница 1: ......
