Overview
T h i s w a t c h p r o v i d e s Ti m e r S e t s f o r
counting. Each Timer Set contains 2 timers
(A & B). When timer A is finished and then
timer B start counting.
Besides, this watch provides 4 operation
modes for different counting purpose:
Linked Timer:
When a timer set is
finished counting, the next timer set will
start immediately until the last timer set
is finished counting.
Repeat Timer:
Similar to Linked Timer,
but there is only one timer set is
counting. It repeats counting for several
times which is set before start.
Single Timer:
Only one Timer set will
count. When it is finished, the timer
stop.
CountUP Timer:
After the timer set
finished counting, it will start counting
up to the preset value from zero.
NOTE:
For more details of different operation
modes, please refer to the coming chapters.
+
+
&
&
&
&
7.0 Timer Mode
- Overview
: Linked Timer
: Repeat Timer
: Single Timer
: CountUP Timer
4 Different Operation Modes
Deleting one Lap Record
User can delete some unwanted Lap
Records to free up memories.
Select the Record that would like to be
deleted as chapter 6.0.
Hold down the [M] button for about 2
seconds to go to deletion display.
Press [U]/[D] to select YES or NO for
the deletion.
Hold the [M] button to confirm and
process. Then the watch will go back to
Records Selection Display.
Deleting ALL Lap Records
+
In Lap Records Display, hold down the
[M] button for more than 4 seconds to
go to “dEL ALL” Display.
Press [U]/[D] to select YES or NO for
the deletion.
+
Hold the [M] button to confirm and
process. Then the watch will go back to
Records Selection Display.
+
+
+
+
+
+
Hold [D]
for 2 sec.
Hold [D]
for more than
4 sec.
Lap Records Display
Delete
ONE Record
Delete
ALL Records
6.2 Chronograph Recall Mode
- Deleting Lap Records
[U]/[D]
Hold
[M]
Toggle
YES or NO
Confirm
Flashing
Recalling Lap Records
After a Record is selected, press [S] will
go to the Lap Recall Display.
Press [U]/[D] to review different Laps
a n d a l s o t h e M i n i m u m , M a x i m u m ,
Average Lap.
During Lap Review, press [S] will swap
the display between Lap Time and Time
Difference.
NOTE 1:
There will be no time difference
d i s p l a y f o r M i n i m u m , M a x i m u m a n d
Average Lap.
NOTE 2:
As the Time Difference is a
dynamic calculation which depends on the
Target Time set. When there is no Target
Time set or the Lap number is larger than
50, there will be no Time Difference shown
during recalling.
Press the [M] button will exit the Lap
Recall Display and go back to Records
Selection Display.
+
+
+
+
[U]*
[U]*
[U]*
*NOTE: Press [D] in reverse direction
[U]*
[U]*
[U]*
Lap 1
Average
Lap Time
Lap 2
Maximum
Lap Time
Last Lap
Minimum
Lap Time
6.1 Chronograph Recall Mode
- Lap Recall Display
[S]
Lap Time
Time Difference
Total
Time
Split
Time
Split
Time
Lap
Number
Recalling Lap Records
After storing a series of Lap Records,
user can recall these records from this
mode.
Each set of records will have a date and
time stamp for user to identify.
The display will swap to show date
stamp and time stamp alternatively for
every 2 seconds.
Press [U]/[D] to select Record to be
recalled.
Press the [S] button to go to Lap Recall
Display to review the details of the
selected Record. (Like Lap Time, Split
Time, Total Time etc.)
Press the [M] button will exit the Lap
Recall Display and user can select
another record to be recalled.
+
+
+
+
+
+
Swap
every
2 sec
.
Time Stamp of
the Record
Date Stamp of
the Record
6.0 Chronograph Recall Mode
- Recalling Lap Records
[U]/[D]
[S]
[M]
Records Selection
Lap Recall Display
Record
Number
Содержание PSWLMR30
Страница 1: ......
