7
RDM – available parameters
The PX803-W supports the DMX-RDM protocol. DMX protocol allows only
of a one-way data transmission, while extension the RDM protocol can
transmit information in two directions. This makes possibility of monitoring
activities of the compatible devices. Thanks to RDM some available settings
of compatible devices may be programmed using this protocol.
List of RDM parameters supported by the PX803
-W
:
Parameter name
PiD
Description
SUPPORTED_PARAMETERS
0x0050 all supported parameters
PARAMETER_DESCRIPTION 0x0051 description of additional
parameters
DEVICE_INFO
0x0060 information concerning the device
SOFTWARE_VERSION_LABEL 0x00C0 firmware version of the device
DMX_ADDRESS *
0x00F0 DMX starting address of the device
IDENTIFY_DEVICE *
0x1000
device identification;
Two states are possible:
identification is off (0x00 value)
and identification is on (0x01 value)
DEVICE_MODEL_
DESCRIPTION
0x0080 device description, e.g. name
MANUFACTURER_LABEL
0x0081 manufacturer description,
e.g. name
DEVICE_LABEL *
0x0082
additional device description;
It is possible to enter an additional
device description using up to 32
ASCII characters
13
