6.1 Available parameters
DMX Addr.
– changing the DMX address of the color temperature and
brightness channel in the range 1 – 512,
No Signal –
behavior of the device when the DMX signal disappears:
•
Scene
– setting the scene displayed when the DMX signal disappears,
•
On
– switching the lamp on at 100%,
•
Off
– complete shutdown of the lamp,
•
Hold
– maintaining the last value of DMX signal,
No Signal Time
– device reaction time after the disappearance of the DMX
signal (0.0 – 10s),
Smooth
– smooth changes in DMX signal value (
OFF
/
Level 1 – 4
),
Control mode
– operating mode selection:
•
1ch MONO
– 1 DMX channel for brightness control,
Driver temp.
– a list of the lowest, highest and current operating temperature
of the power supply,
Module temp.
– a list of the lowest, highest and current operating temperature
of the module with LEDs,
PWR time / ACT time
– total lamp operation time / total lamp lighting time,
Factory Default
– factory reset in PX803-W:
•
DMX Addr: 001
•
No Signal: Off
•
Scene: 128
•
No Signal Time: 1.0 s
•
Smooth: Level 3
10
