PXM PX763, Руководство пользователя

Страница: 21 / 35

6.11 Default settings and memory error
The device was equipped with the possibility to restore the default values
and they can be restored in two ways:
•
using the command dEF (situated in the menu)
• while turning the device on (using the key “ prev ”)
In order to make use of this option, disconnect the PX763 from the mains
supply. Before reconnecting it to the mains supply, the key " prev " should be
pressed and held. Then, after switching on the message dFI will appear on the
screen of the device (while turning the power supply on to the moment of
displaying the message
dFI the key " prev " must be held down).
The default setting in the PX763 are the following:
• the DMX address – 1
•
the driver’s operational mode 36 – 36
• the operational mode no signal – switched off ( oFF )
•
the smooth functional ( smooth ) – Level 1
• frequency – 274Hz
•
the SCr option – switched off
• the white balance – switched off ( OFF )
21
ENTER
9 x NEXT
ENTER
PRESSED
ENTER
ENTER
ESC