2. Individual parameters –
Ind
– each channel may be set with individual
parameters, including individual DMX addressing. The same address
may be set to more.
Group parameters have a higher priority than individual parameters.
This means that programming in the ALL mode, for example, the DMX
address, cancels the previous settings for all channels.
3. Dimmer temperature –
°C
– the function to check out the internal
dimmer temperature.
4. Analog / digital mode of operation switching –
AdC
– the function to
switch between digital control mode (DMX) or analog control (0 – 10V
signal or monostable external button).
5. Scenes and chasers programming –
dEF
– active only with the digital
control mode (so the parameter
AdC
set to
OFF
).
The function allows:
◦
3 scenes programming
◦
4 user-defined chaser steps with speed and fading options
programming
◦
speed and fading of built-in chaser
6.1 Digital input settings
Digital input (so controlling the dimmer with DMX-512 signal) is active
when parameter
AdC
is set to
OFF
.
10