8. After the installation is completed, check the neutralization efficacy of
all powered devices.
9. All repairs demanding casing opening should be made with cut off
power supply.
10. The device should be strictly protected against water and other
liquids.
11. All sudden shocks, particularly dropping, should be avoided.
12. Device with damaged (bent) casing should be not connected to the
mains.
13. The device cannot be turned on in places with humidity exceeding
90%.
14. The device cannot be used in places with temperature lower than +2°C
or higher than +40°C.
NOTE!
1. Improper connection of the protective wire can cause electric shock.
2. Improper connection of the neutral conductor will cause the dimmer
to malfunction.
3. The dimmer can control resistive and inductive circuits (loads) only.
The dimmer cannot be used to control the electronic transformers,
electronic ballasts for fluorescent lamps and other devices that have
electronic circuits, unless the producer distinctly states so.
6