PXM Driver LED 1x2A/48V, Руководство пользователя

Страница: 6 / 11

6
The PX319 driver is equipped with an additional DIP-Switch which allows you to set the No Signal
function, responding to the driver action when it does not receive the DMX signal.
With this switch, it is possible to set one of 4 brightness levels. The brightness increases from the
smallest (zero) to the maximum one, in accordance with the binary markings on the “DIP switch”.
Below are brightness levels and the corresponding switch settings.
2 3 4 5 6 7 8 9
ON DIP
1 10
With the smooth function enabled, transitions between successive control signal values are
smoothed, allowing for smooth changes in the brightness of the connected LEDs. This prevents
the light “vibration” effect that usually occurs in lighting systems when light intensity is being
changed
.
The “smooth” function and DMX address set to 1 .
5.1. SMOOTH FUNCTION SETTINGS
5.2. NO SIGNAL FUNCTION SETTINGS
2 3
ON
1
2 3
ON
1
2 3
ON
1
2 3
ON
1
0
1
2
3
Zero brightness level
1 brightness level
2 brightness level
3 brightness level
5.3. PWM FREQUENCY SETTINGS
You can set PWM frequencies using individual switch position no. 3 on the DIP switch:
2 3
ON
1
Zero brightness level and PWM frequency of 366 Hz
2 3
ON
1
Zero brightness level and PWM frequency of >20 kHz