PVI VeCOAX MicroMod-2, Справочное руководство

Страница: 2 / 40

2
1)
This unit is already pre-configured
Follow the quick start points on the next page to operate the unit plug n play
There is no need to reset the unit
If you reset the unit from the front panel, all settings will be lost, and you will need to set again
all the parameters as per this manual.
2)
Manuals & Tech Support
Copy of manuals, procedures, troubleshooting are available on our specific pvisupport.com
website. You can also open a ticket at any time for special support and quick help.
Tickets are responded MON-FRI 9 am – 4 pm US EST Time. Tickets received out from this
window or on national holidays days will be responded asap the following business day.
3)
Default Configuration
Reset to factory default the unit will take the unit to a laboratory testing condition.
All the current parameters will be lost.
You can download from pvisupport.com the default configuration for your unit matching your
current model and software version from the serial number sticker on the unit.
To load the default operational configuration, on the web interface go to backup/restore and
browser / load / apply then save the config file
From the same Web control screen, you can also save your current configuration to a file, so in
case you can always recover it to restore previous conditions
4)
If you need to install MULTIPLE UNITS
To install multiple units on the same coax / ip network you will need to :
- set different frequencies on each unit
- set different names per each channel
- set different network id per each unit
- set different NIT / VCT numbers ( program numbers )
- set different IPTV ip service port addresses per each unit
- set different IPTV streaming ports per each channel
Pre-configured presets might be available on pvisupport.com, searching your model and sw version
see the serial sticker on the unit/s
5)
If you are looking for a specific configuration
just follow this manual, page by page, for each of your units.
At the end you can save your specific backup file for this configuration for future use
FOR ANY TECH SUPPORT, THE FASTEST AND MOST EFFICIENT PROCEDURE IS TO OPEN A QUICK
TICKET ON WWW.PVISUPPORT.COM so the proper engineer will address your questions and will
help you very quickly, usually in minutes. Phone calls are less fast and might not be able to resolve
your question as we cannot send you pictures, manuals, quick starts, documents, files over the
phone. Please we suggest to open a quick ticket first so we can help you faster and better, in
minutes.
Read Me
Firs
t