PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A
Left Side Ramp Panel
1
B
Right Side Ramp Panel
1
B
A
SAFETY
INFORMA
TION
HARDW
ARE CONTENTS
(shown actual size)
3
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
Although ramp is equipped with anti-slip traction tape, caution is required as some factors can
reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on
the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of
human stride. Caution should also be taken regarding type of floor finish and possible human
error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and
require users to use caution under field conditions as outlined here.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that the hook (top end) is pressed firmly against the step or platform before using.
•
When possible, use the clevis pins provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height
of step/platform not to exceed 6 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
CAUTION
•
When carrying ramp sections, always use handles and make sure hook-and-loop straps are
secure.
Clevis Pin
Qty
. 2
AA
WARNIN
G
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
Although ramp is equipped with anti-slip traction tape, caution is required as some factors can
reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on
the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of
human stride. Caution should also be taken regarding type of floor finish and possible human
error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and
require users to use caution under field conditions as outlined here.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that the hook (top end) is pressed firmly against the step or platform before using.
•
When possible, use the clevis pins provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height
of step/platform not to exceed 6 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
CAUTION
•
When carrying ramp sections, always use handles and make sure hook-and-loop straps are
secure.
Clevis Pin
Qty. 2
AA
WARNING
SAFETY INFORMATION
HARDWARE CONTENTS
(shown actual size)
3
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
•
Ramps are designed for wheelchairs and electric scooters.
•
Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed
loads.
•
Although ramp is equipped with anti-slip traction tape, caution is required as some factors can
reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on
the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of
human stride. Caution should also be taken regarding type of floor finish and possible human
error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and
require users to use caution under field conditions as outlined here.
•
For your safety, a caregiver or aid should be present at all times when using any ramp.
•
Proper setup is essential for safe loading and unloading.
•
Make sure that the hook (top end) is pressed firmly against the step or platform before using.
•
When possible, use the clevis pins provided to lock ramp in place.
•
Safe lifting practices should be used when lifting product.
•
The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height
of step/platform not to exceed 6 inches.
•
Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.
CAUTION
•
When carrying ramp sections, always use handles and make sure hook-and-loop straps are
secure.
Clevis Pin
Qty. 2
AA
WARNING
2
