
FC100-CF Manual
Revision B
/
February 2022
Page 8 of 23
Setup
The FC100-CF requires a 2-position, 4-way air solenoid valve to actuate the air section.
The valve should be operated with clean, dry air between 60-100 psi. Two #10-32 threaded
air ports are located on the air section of the valve. The port located furthest from the
midsection of the valve is air to close the valve. The port located closest to the mid-section
of the valve is air to open the valve. Quick connect air fittings are typically supplied with
the FC100-CF to fit 5/32 in tubing.
Note: The valve should normally be in the closed position.
Fluid is supplied to the FC100-CF through the 1/8 in fnpt port located on the stainless steel
fluid section of the valve.
Figure 2: Solenoid Valve