Installation Guide / SolarRoof
12
Code-Compliant Planning and Installation Guide V 1.0 (New Zealand) - Complying with AS/NZS 1170.2-2021 -
- Installation Instructions -
Installation Instructions
Installation Dimensions
All drawings and dimensions in this Installation Guide are a generic reference only. PV-ezRack® SolarRoof is to be
optimized to suit specific conditions for each project and should be documented in a construction drawing.
Major components of PV-ezRack® SolarRoof may be provided in section sizes and lengths varying from those shown
in this guide. The installation process detailed in this instruction guide remains the same regardless of changes in
component size.
If you need to do any on-site modifications or alteration of the system please provide marked up drawings/sketches
for Clenergy’s review, prior to modification, for comment and approval.
Installation Instruction
- Assess the number of modules in the vertical direction using the module height plus at least 18mm between modules
(please check the installation manual of the solar module manufacturer);
- Assess the Number of modules in the horizontal direction using the module width plus 18 mm (20 mm if using
Universal Clamps) between the modules.
Notes:
The standard end clamp will also add 20 mm (except for dual end clamps) on each side to the space required;
- Assess the horizontal spacing of the Roof Hooks;
- Assess the vertical spacing of the Roof Hooks = approx. 1⁄2 to 3⁄4 of module height;
- Always check the installation manual of the PV-Module you use in order to determine the allowed fixing points on
the module frame.
