Operation of the Software PVPM.disp
Page 26
11.1.5 Report
This button creates a measurement protocol containing
the I-V-diagram and measured as well as calculated
values of the currently loaded data. This report may be
printed out or written to a PDF document.
Please pay attention to the fact, that in some cases the
page orientation of the printer has to be changed
before printing out. The print uses the whole available
printing area.
The buttons on top of the preview window are from left
to right:
●
●
Export to PDF
●
Zoom factor
●
Full page
●
Page settings
●
Page backward / forward
●
Close preview
11.1.6 Printer Settings
Calls the windows standard dialogue “Printer Settings”. Select the
desired printer settings here.
11.1.7 Quit Program
Here you finish the program PVPM.disp. The current data are not saved automatically but you will get an
warning, that your data should be saved before closing the program
Don’t forget:
Finish “Transfer” on the PVPM when you close PVPM.disp
Quit PVPM.disp always using one of the functions “Quit program”, the button “End” or the key combination
<ALT>-<F4>. It is also important, that you shut down your operating system properly, because else a data loss
might occur due to a write back cache etc.
11.2 Edit
This function is only active when the cursor is placed in a text edit field.
11.2.1 Cut
Cuts the marked text and moves it to the clipboard.
11.2.2 Copy
Copies the marked text and moves it to the clipboard.
PVPM 1000X / 1040X
User Manual
PV-Engineering GmbH
