Changing the world one Vehicle at a Time
ROUTINE INSPECTION BEFORE RIDING
CAUTION
To ensure the optimal and safe performance of your Pushpak, it is essential to perform the following checks
before every ride. Failure to do so could result in unsafe conditions, poor performance, and potential
damage to your Pushpak.
1. Battery - Check the battery life indicator and charge, if needed. Your Pushpak can travel a max range of
50 miles on a full charge. To maximize use per trip, it is recommended you do not allow the battery
capacity to decrease to less than 20%. When the battery is at 20% or lower, promptly charge the
battery to full capacity.
FIRST RIDE: Charge the battery to full capacity before your first ride.
2. Front/rear brakes – Ensure both the front and rear hand brakes engage effectively to bring the
Pushpak to a complete stop.
3. Tires – Ensure all tires are at the recommended psi, ad that there is no damage or extreme wear that
compromises their integrity.
NOTE: Improper tire inflation can lead to dangerous conditions including, but not limited to, abnormal
tire wear, tire slippage, and other compromises in vehicle performance.
4. Lights – Ensure the headlight, front/rear turn signals, taillights, including braking lights, function
properly.
5. Instrument display – Make sure the display for battery life, speedometer, and odometer
functions properly.
6. Horn – Make sure the horn sounds when pushed.
7. Parking brake – Make sure the parking brake effectively locks and releases the rear brakes.
8. Mirrors – Make sure both mirrors are correctly adjusted for peripheral viewing on either side.
9. Steering control/alignment –Ensure the steering column is stable and aligned and turns appropriately
to the left and right.
11
