Changing the world one Vehicle at a Time
CHARGING YOUR PUSHPAK/BATTERY INFORMATION
Your Pushpak comes with a battery charger. DO NOT use other chargers to charge your Pushpak. Use the
battery life indicator on the Pushpak instrument display to gauge the battery life. To maximize use per trip,
do not allow the battery life to decrease to less than 20%. When the battery life is at 20% or lower,
promptly charge the battery to full capacity.
FIRST RIDE: Charge the battery to full capacity before you take your first ride.
CAUTION
Take reasonable precautions when charging and NEVER use the charger in a damp
environment or in the presence of combustible items.
The charger may become hot during the charging process. To prevent a potential fire hazard, NEVER cover
the charger while charging to allow for the dissipation of heat.
If you encounter any difficulty charging your Pushpak or experience unusual occurrences in the charging
process, immediately shut off the power and contact Pushpak Motors or authoan burron rized service
vendor for service.
Avoid getting any liquid around the battery as this can potentially cause leakage, overheating smoke ,and
possible explosion.
I. CHARGING THE BATTERY
a. Turn the ignition switch to the OFF position and remove the key. DO NOT charge the Pushpak
with the ignition in the ON position.
b. Make sure the battery power cable inside the battery compartment is securely plugged into the
battery.
c. Make sure the battery switch inside the battery compartment is in the ON position and that all
attached wires are secure.
NOTE: Some models of Pushpak have no battery switch. In this case step right to d. below.
19
