PURSUIT S 408 SPORT 2017, Руководство пользователя, Страница: 175 / 178

Additional Information Appendix G
G-7
MAINTENANCE GUIDELINES FOR BAUSCH
ENTERPRISES ALUMINUM PRODUCTS
BAUSCH ENTERPRISES IS PROUD TO BE PROVIDING HIGH QUALITY ALUMINUM
MARINE PRODUCTS TO THE BOATING INDUSTRY.
ALL BAUSCH PRODUCTS ARE MANUFACTURED WITH ONLY THE HIGHEST QUALITY
MATERIALS AVAILABLE TO INSURE NOT ONLY LASTING STRUCTURAL INTEGRITY,
BUT ALSO LONG LASTING ATTRACTIVE APPEARANCE.
TO KEEP YOUR ALUMINUM PRODUCTS LOOKING GOOD AND PERFORMING WELL, WE
SUGGEST THE FOLLOWING GUIDELINES.
1. ROUTINE CLEANING - THOROUGHLY WASH AND CHAMOIS ALL ANODIZED ALUMI-
NUM PARTS WITH FRESH WATER AFTER EACH USE. PARTICULAR ATTENTION MUST
BE PAID TO TOPS WITH ALUMINUM FRAMES EQUIPPED WITH CANVAS OR FIBER-
GLASS TOPS. THE AREAS DIRECTLY UNDER THE TOPS COLLECT MOISTURE, SALT
AND DIRT AND ARE MORE PRONE TO PITTING IF NOT CLEANED OFTEN. CLEANING
OF STORED BOATS AT LEAST WEEKLY IS RECOMMENDED ESPECIALLY IF STORED
OUTSIDE AND SUBJECT TO SALT SPRAY, ROAD FILM, ETC.
2. PROTECTION - ANODIZED ALUMINUM PARTS SHOULD BE COATED WITH A METAL
PROTECTOR AT LEAST ONCE EVERY TWO MONTHS. BAUSCH ENTERPRISES REC-
OMMENDS RUPP ALUMA GUARD OR SIMILAR NON ABRASIVE METAL PROTECTOR.
3. WHITE SPOTS AND STAINS MAY BE CAUSED BY SOAP DRYING ON THE ALUMINUM
AND/OR WATER IMPURITIES.
4. ROUTINELY CHECK ALL BOLTS AND FASTENERS. ROUTINE BOAT OPERATION CAN
CAUSE LOOSENING OF FASTENERS AND MAY RESULT IN WELD FATIGUE IF NOT
CORRECTED.
5. MAIN LEGS AND BRACES MAY COLLECT WATER INSIDE THE PIPE. DRAIN HOLES
ARE DRILLED NEAR THE MOUNTING PADS AND MUST BE KEPT CLEAN TO PRE-
VENT WATER FROM COLLECTING AND POSSIBLY FREEZING IN NORTHERN CLI-
MATES. WATER FREEZING IN THE PIPE CAN RESULT IN PIPE SPLITTING AND/OR
WELD CRACKING.
FOR ANY QUESTIONS, PLEASE CALL DANA OR TODD BAUSCH AT
772-220-6652 OR E-MAIL DANA@BAUSCHENTERPRISES.COM