PURSUIT 3370 OFFSHORE, Руководство пользователя

Страница: 54 / 139

3370 OFFSHORE
54
ALWAYS TURN THE RAW WATER PUMP SWITCH TO THE “OFF” POSITION WHEN
LEAVING THE BOAT UNATTENDED.
DO NOT RUN THE HIGH PRESSURE PUMP DRY FOR EXTENDED PERIODS AS DAMAGE
TO THE PUMP WILL RESULT.
6.3 Livewell
Sea water is provided to the livewell by a 12-volt circulating pump. This pump is designed to carry a constant
flow of water to the livewell. The pump is activated by the livewell switch in the cockpit. An overflow built
into the livewell automatically controls the water level in the livewell. Always turn the pump off at the switch
panel when the livewell is not in use.
The livewell is also equipped with an aerator pump. This pump circulates the water in the livewell while
injecting oxygen into the water flow. Either the livewell pump must be operating or the livewell full of water
with the drain plug firmly secured for the aerator pump to function.
The livewell pump is equipped with a sea strainer on the intake side of the pump located aft bilge port side.
This should be checked frequently and cleaned as necessary.
To fill the livewell, insert the plug into the drain fitting at the bottom of the livewell. Make sure the valve
at the intake thru-hull fitting is open and activate the livewell switch. When the water level reaches the
overflow, it will begin to circulate.
To drain the livewell, turn off the livewell pump and pull out the plug in the drain fitting at the bottom of
the livewell. When the livewell has completely drained, use the washdown hose to flush the livewell and drain
debris.
The livewell supply thru-hull valve should be closed whenever the livewell is not in use. This will prevent
water from entering the livewell while the boat is cruising.
DO NOT USE THE LIVEWELL AS A DRY STORAGE AREA WHEN IT IS NOT IN USE.
SEAWATER COULD ACCIDENTALLY BE DELIVERED TO THE LIVEWELL FROM THE
THRU-HULL FITTING AND DAMAGE EQUIPMENT STORED THERE.
DO NOT RUN THE LIVEWELL PUMP DRY FOR EXTENDED PERIODS AS DAMAGE TO
THE PUMP WILL RESULT.