PURSUIT 3370 OFFSHORE, Руководство пользователя

Страница: 35 / 139

3370 OFFSHORE
35
Heavy Duty Circuit Breaker: Used to protect the windlass circuit.
Heavy Duty Distribution Stud: One or more of these may be used to distribute negative DC power.
Heavy Duty Buss: Contains multiple distribution studs to distribute negative DC power.
Blank Module: Acts as a filler to complete the modular design.
BATTERY SWITCHES
There are four battery switches and two parallel switches to manage the 12-volt power distribution.
The Port Start switch controls the battery for the port engine. The Starboard Start switch controls the battery
for the starboard engine. The Emergency Parallel switch connects the port and starboard engine batteries for
emergency starting if one of the engine batteries is dead or low.
The Electronics switch provides power to the electronic buss bar that feeds aftermarket electronics
installations. The House switch provides power to the house circuits on the boat. If the Electronics or House
battery is dead or low, the Parallel switch can be used to connect the two batteries together.
For information on battery charging using the on-board charger, refer to Battery Charger in the AC Systems
section of this chapter.
THE BOAT SHOULD NOT BE OPERATED ON A CONTINUOUS BASIS WITH THE EMER-
GENCY PARALLEL SWITCH IN THE "ON" POSITION.
Make sure that all battery switches are activated whenever the engines are running to ensure that all 12-volt
accessories will operate when they are needed. Current is supplied to the automatic float switches for the
bilge pumps and stereo memory when the batteries are connected and the battery switches are off.
DISTRIBUTION BREAKERS
DC Main (Helm)
Supples 12-volt electrical current to the breakers on the helm breaker panel.
Cabin Main
Supplies 12-volt electrical current to the cabin DC breaker panel.
Electronics Main
Reserved for electronics installations. Supplies buss bar located behind the helm.
Forward Bilge
The forward bilge pump breaker provides protection for the automatic float switch on the forward bilge pump.
Aft Bilge
The aft bilge pump breaker provides protection for the automatic float switch on the aft bilge pump.