manualshive.com logo in svg

PURSUIT 3070 OFFSHORE, Руководство пользователя

Поделиться
Скачать
PURSUIT 3070 OFFSHORE Скачать руководство пользователя страница 46

3070  OFFSHORE

DO NOT OPERATE THE AC ELECTRICAL SYSTEM FROM SHORE POWER WITH
REVERSE POLARITY.  REVERSE POLARITY WILL DAMAGE THE SYSTEM AND
EXPOSE PASSENGERS TO ELECTROCUTION HAZARDS.  THIS CONDITION COULD
ALSO CAUSE A FIRE IN THE ELECTRICAL SYSTEM.

DO NOT ATTEMPT TO CORRECT THE WIRING YOURSELF.  ELECTRIC SHOCK
CAN CAUSE SEVERE INJURY OR EVEN DEATH.  ALWAYS HAVE A QUALIFIED
ELECTRICIAN CHECK WIRING.

KEEP CHILDREN AWAY FROM ANY ELECTRICAL CABLES OR EQUIPMENT AND
ALWAYS USE GROUNDED APPLIANCES ON BOARD YOUR BOAT.

UNDETECTED FAULTS IN THE AC ELECTRICAL SYSTEM COULD CAUSE THE
WATER AROUND THE BOAT TO BECOME ENERGIZED.  THIS COULD CAUSE A
SEVERE SHOCK OR EVEN DEATH TO SOMEONE IN THE WATER NEAR THE
BOAT.  NEVER SWIM OR ALLOW SWIMMING AROUND THE BOAT WHEN THE
AC SYSTEM IS ACTIVATED BY THE GENERATOR OR THE SHORE POWER CON-
NECTION.

Disconnecting procedure for shore power connection
Turn the main breaker on the AC panel and the disconnect switch on the dock side outlet to the
“OFF” positions.

Disconnect the cable from the dock side outlet and replace the outlet caps.  Disconnect the cable
from the boat and close the inlet cap.  Store cable.

AC Accessory Breaker Panel
The AC breaker panel is located in the cabin.  The following are descriptions of the AC panel
equipment and the breakers that protect the accessories:

AC Amp Meter
Indicates the total amperage or current being drawn through the AC panel.  It is the total current
level of all of the AC equipment in operation at the time.

AC Volt Meter
Indicates the voltage supplied to the panel.

AC Main Breaker
Protects the general distribution network.  This breaker is very sensitive.  The resulting power
surge that occurs when connecting the dock side cord may cause the main breaker to trip.   To
avoid this surge, always turn the main breaker to the “OFF” position before plugging or
unplugging the shore power cord.  The AC panel also is  equipped with a relay that will cause
the main breaker to trip when reverse polarity current is detected.

4-10

Содержание 3070 OFFSHORE























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды