5
SKALA ELECTRIC TOWEL WARMER (EXPOSED CABLE)
FITTING INSTRUCTIONS
Skala Electric Towel Warmer (Exposed Cable) • 2022-04-01
GB
Step 3
Using a pencil mark the center of the hole in the wall plates
(Fig 4).
Fig 4
Pull the wall plates off the wall, drill the holes, insert the
wall plugs and screw the wall plates onto the wall using
the long M4.5 x 40 screws. It is recommended that silicon
is put around the wall plug hole to ensure there is no water
intrusion into the wall.
Step 4
Now slide the towel rail bracket legs over the wall plates
and using the M5 Allen key secure the rail in position with
the grub screws (Fig 5).
Fig 5
4. ELECTRICAL CONNECTION
When fitting in a toilet or bathroom, the installation must
be in accordance with current Local and National Electrical
Installation Regulations and the electrical connection must
be protected by a 30mA RCD. For further information see
table below:
SKALA
Model
Exposed Cable
Power
70 W
Supply
220 - 240 V
50 - 60 Hz
IP
IP 45
Size
754x500x100 mm