Purkay Labs Audit-Buddy, Руководство пользователя

Страница: 62 / 65

USER MANUAL
62
HARDWARE
How long is the battery life?
Each WIFI adapter use four standard (AA) alkaline batteries. Battery life varies be-
tween 12-24 hours based on scan type. There is a low battery warning when adapter
or TH1 Module batteries fall below safe operating thresholds. Should battery failure
occur, data collected up to that point is stored in the WIFI-MATE PC . Purkay Labs
recommends using the supplied 100-240AV WIFI power brick for long term scans.
Is there a separate power source?
WIFI-BUDDY uses 4 AA Batteries (Alkaline or Lithium) for short term monitoring or
a 100-240VAC Power Brick supplied with the adapter. Purkay Labs also provides a
battery pack, please contact for more details.
Will WIFI-BUDDY work in my facility?
WIFI-BUDDY has been rigorously tested in a number of facilities. Purkay Labs’ offers
a “Tester” program to confirm that the WIFI-BUDDY system works with your facilities’
IT Protocols.
To ensure there are no IT restrictions, we ask that you verify that:
• Your facility allows peer to peer communication as WIFI BUDDY uses P2P via UDP
protocol
• You have permission to install Silicon Labs’ drivers (optional)
• You can authorize program communication through Windows Firewall
Can I use the facility WIFI?
Yes, WIFI-BUDDY is designed to work with facility WiFi. WIFI-BUDDY uses 802.11
b/g/n for communication. Users should check facility signal strength before conduct-
ing a scan to ensure that the facility WIFI signal reaches the top and bottom of all
cabinets in the hall.
Purkay Labs recommends using the cell phone signal strength as a good indicator
for WIFI-connectivity. If signal strength is poor, users can use a separate router WiFi