Purite SELECT FUSION 160, Руководство оператора

Страница: 46 / 89

OPERATING MANUAL FOR SELECT FUSION
5.5.2 Set Time
The Select unit incorporates a real time, 24 hr clock. The clock will
have to be adjusted for BST. The clock will be factory pre set to the
correct GMT. For overseas users of the equipment the time settings
may have to be altered as necessary to match individual time zones.
5.5.3 Set Date
The correct date will be pre-set into the unit, check before use and
adjust if necessary. Leap year calendar changes will have to be
adjusted for.
5.5.4 Audio Alarm Enable
The Unit incorporates a buzzer alarm, which will sound should any of
the alarms be activated, see
Section 5.7
for list of alarms. The alarm
can be permanently disabled or can be muted each time by pressing
button
Y
and selecting “
Mute Alarm
” from the menu list.
5.5.5 Set Quality Alarm
This alarm refers to the quality at which the NCP media pac can be
pre-set to indicate replacement. The set point is factory pre set to alarm
at 1M
Ω .
NB:
The capacity quoted for the NCP is to 1M Ω . If the set point is
raised then there will be a reduction in cartridge capacity.
5.5.6 Set Temp Alarm
If the treated water temperature exceeds the pre-set temperature valve,
a
“Temperature High”
alarm message will be displayed. The default
temperature setting for the unit is set at 35
o
C and can be accessed via
the
“User Settings”
menu
Section 5.5
.
5.5.7 NCP Pack Date
Following installation of a new NCP Pack the date of replacement must
be reset. A date of 6 months in the future is set on pressing the
RESET
button.
5.5.8 PP8 Pack Date
Following installation of a new PP8 Puripac the date of replacement
must be reset. A date of 6 months in the future is set on pressing the
RESET
button.
Iss: F 17.03.08