Purite SELECT FUSION 160, Руководство оператора

Страница: 16 / 89

OPERATING MANUAL FOR SELECT FUSION
SELECT FUSION
Fig-1 Fig-2 Fig-3
(Front view) (Side view) (Rear view)
2.0 PROCESS DESCRIPTION
2.1 OPERATIONAL OVERVIEW
All external hydraulic and electrical connections are positioned at the
rear of the unit, to protect them from accidental damage.
Potable feedwater enters the unit via an external 5 micron, carbon
impregnated, prefilter; protecting the inlet solenoid valve from
particulates and the reverse osmosis membrane from possible chlorine
degradation. The filter removes up to 95% of all particles > 5 micron
and will dechlorinate to < 0.1 ppm on 0.5 ppm feedwater supply.
The Pre-filtered, water enters the reverse osmosis module/s. Purified
water passes through the membrane and is termed; the permeate (85-
95% of salts removed). The water containing the rejected salts passes
across the membrane and out of the RO module to drain and is termed,
the concentrate.
The concentrate flowrate is controlled by a fixed orifice restrictor
located in the Drain line and is set at approximately 60l/hr.
The, permeate is further purified by a Puripac-8 cartridge containing
mixed ion-exchange resin and activated carbon. The deionised water
then feeds directly into the integral 20 litre storage tank. Water can be
dispensed from this tank via the front mounted bib tap.
The quality of water drawn from the tank will have a quality conforming
to Grade II standard.
Iss: F 17.03.08