Purite SELECT FUSION 160, Руководство оператора

Страница: 20 / 89

OPERATING MANUAL FOR SELECT FUSION
3.4
WALL MOUNTING INSTRUCTIONS (OPTIONAL)
Check
Section 1.6
for working weights of the Select Fusion units
before attempting to wall mount. It is vital that the supporting wall is
sound and is of load bearing, brick or concrete construction and of
adequate thickness to secure to and carry weights of potentially up to,
44Kgs.
Wall fixings must be of good quality and of the largest size to match the
10mm diameter holes provided in the wall mount brackets and of
adequate length to ensure a strong retention. All fixing points must be
used and be sound and tightened before attaching the unit. If unsure
contact Purite Customer Service Department for advice.
3.4.1 Fitting
A Select Fusion Unit can be heavy and difficult to handle at installation;
therefore, it is advisable to have additional personnel and/or suitable
equipment to assist with the installation of this unit.
Note:
When required, Select units are specifically built to fit a wall mounting
bracket, therefore, if at a later date it is required to remove the unit to
stand on a bench top, it
MUST
be fitted with 2 off Foot Brackets.
Please contact the Purite Service Department for further information.)
FIG-5 WALL MOUNT BRACKET
5 x 10m m dia.
Holes for fixing to
m ounting surface
2 threaded holes to
attach unit to w all
m ounting bracket
2 holes to attach
unit to w all
m ounting bracket
Iss: F 17.03.08