Purified Air 1500EI, Техническое и эксплуатационное руководство

Страница: 34 / 46

Electrostatic Precipitator (ESP)
Filter Unit
Technical and Operations Manual - Maintenance and Cleaning 28
7.3.3 Cleaning the Mesh Filters (pre and post)
Clean the Mesh Filters as follows:
1.
Clean the Mesh Filters (pre and post) in hot water (at approx. 60°C) to which a
detergent solution has been added. This treatment can be repeated several times. A
pressure washer can also be used to clean the filters.
2. Allow the Mesh Filters to dry completely after cleaning before re-inserting into the
Unit.
7.3.4 Cleaning the Collector Cell
Clean the Collector Cell as follows:
1.
Clean the Collector Cell in hot water (approx. 60°C) to which a detergent solution
has been added.
WARNING
Although the Collector Cell can be cleaned using a pressure
washer, extreme care must be exercised to avoid damaging or
distorting the plates.
2. Check the Ioniser during washing for broken Ionisation Wires.
Note: If fitted, broken ionisation wires can simply be replaced by hooking the
sprung end of the new wire over the support post, pulling the wire against
the spring’s tension and attaching the other end of the wire to the opposite
post, having first removed the broken wire.
3. Whilst washing the Collector Cell, check to see if any of the Collector Cell’s plates
have been bent.
Note:
If a bent plate is found, it can normally be straightened by either carefully
applying pressure with a screwdriver or by using a pair of long nosed pliers.
If the Collector Cell is beyond repair, please contact Purified Air to purchase a new
one.
4. Allow the Collector Cell to dry completely after cleaning before re-inserting into the
Unit.
7.3.5 Replacing the Collector Cell and Pre and Post Mesh Filters
Replace the Collector Cell and pre and post Mesh Filters as follows:
1.
Replace the Collector Cell.
Note: If the Unit has more than one Collector Cell, ensure that the electrical
connections between them are making contact.
2. Slide the Mesh Filters (pre and post) into their previous positions in the Collector
Cell and Filter Carrier.