PureTools PT-SW-HDBT41, Руководство пользователя

Страница: 10 / 36

User Manual
PT-SW-HDBT41
5
3.2 Rear Panel
①
INPUTS: Four RJ45 input ports to connect compatible HDBaseT transmitters
using CATx Ethernet cables. Note that the connected transmitters cannot be
powered using PoC and must be powered using their power adaptors.
②
HDBT OUTPUT: RJ45 output port to connect a compatible HDBaseT receiver by
CATx Ethernet cable. The receiver can be powered from the switcher with 48V
PoC output function.
③
HDMI OUTPUT: Type-A female HDMI output port to connect HDMI display.
④
RS232: 3-pin terminal block to connect a control device (e.g. PC) to control the
switcher via RS232 commands.
⑤
IR EYE: 3.5mm mini jack to connect IR center control device to receive IR signal.
⑥
IR IN: 3.5mm mini jack to connect the IR receiver for IR pass-through. When the
HDMI output is selected, the IR IN port is used with the IR OUT port of
transmitter to control the source device by IR.
⑦
IR OUT: 3.5mm mini jack to connect the IR emitter for IR pass-through. When the
HDMI output is selected, the IR OUT port is used with the IR IN port of
transmitter to control the local HDMI display by IR.
⑧
DC 24V: DC connector for the power adapter connection.
OUTPUTS
HDMI
DC 24V
RS232
Tx Rx
HDBT 3 HDBT 2 HDBT 1
INPUTS
HDBT 4
IR EYE IR IN IR OUT
CONTROL
HDBT
1
2
3 4 5 6 7 8