Edition from 03.06.2015
3
PLC330.
Multichannel stepper motor driver
www.purelogic.ru
8 (800) 555 63 74
01
02
General information
Delivery set
Technical features
PLC330 is a microstepping multichannel driver of stepper motor
control. The module allows to control 4 machine axes using LPT-port.
The driver has inbuilt coil short-circuit protection, back EMF effect
protection.
The multichannel driver supports control of frequency converter from
PWN signal of a controlling program and has inbuilt regulated timer for
control of a coolant pump. The module has 5 inputs for limit sensors or
E-STOP button connection.
The device is optimal for control of bipolar and unipolar Purelogic R&D
stepper motors (PL42/PL57 series). Work with other stepper motors is
also possible.
• Multichannel driver PLC330 — 1 pcs.
• LPT-cable — 1 pcs.
• Instruction manual — 1 pcs.
• Board for connecting sensors PLC330 Alarm Mod-A— 1 pcs.
• CD with software — 1 pcs.
03
01. General information
Control method
Supply voltage
Operating current of each stepper motor
Step division (microstep)
PWN converter parameters>voltage
Timer parameters of lubricoolant
control
Max shaft rotation frequency
Isolation resistance
Net weight
STEP Max signal frequency
Installed relays parameters
Operating temperature
Overall dimensions (W x H x D)
STEP/DIR/ENABLE from LPT port
18...30V (bogey value 27V)
1:1, 1:2, 1:8, 1:16
Uoutp. = 0...9.5V (when changing pulse
Frequency converters control ratio
Q=0...1)Power 10V from frequency
convertor
Operation frequency – 8...60 sec
Duration – 1...8 sec
30 cycles per second
500 MOhm
0,8 kg
100 kHz
220V/7А
0...50 °С
200 x 49 x 114 mm
0.5А...3.0 А (discrete regulation)
!
Check
www.purelogic.ru
for more information.
TURN OFF POWER DEVICE BEFORE MAKING ANY CONNECTIONS AND
DRIVER OPERATION MODE CHANGINGS.
DO NOT MOUNT THE POWER SWITCH AFTER THE POWER SOURCE
(ON THE DRIVER POWER LINE).
POWER SWITCH SHOULD BE INSTALLED BEFORE POWER SUPPLY, AT
~220V SIDE.
DO NOT CONNECT POWER SUPPLY’S «-» TO GROUND, MASS,
HOUSING, ETC.
STRICTLY OBSERVE THE POLARITY OF POWER SUPPLY AND CONTROL
SIGNALS CONNECTIONS.
