PureLink by Dtrovision
7
Installation and Connection Instructions
1.
Turn off both the video source and the display before connecting any cables.
2.
Connect CATx cable between the HTR transmitter and the HTR receiver.
3.
Connect HDMI cable between the source and the HTR transmitter AND the HTR
receiver and the display.
4.
Connect the power supply unit to HTR transmitter and HTR receiver module.
5.
Turn on Display.
6.
Turn on Video Source.
How to terminate CATx cable
HTR was designed to conform to TIA/EIA-568-B standard. Please ensure that each PIN
layout of HTR transmitter and HTR receiver are corresponding with the picture below
before connecting the cable. Please note that CAT5e or above level cable enables to
deliver better video quality and longer distance.
For HDBaseT
For 10/100Mbps Ethernet
Pin
TIA/EIA-568B
Wire color
Digital RGB
1
Orange/ White
DATA0 +
2
Orange
DATA0 -
3
Green/ White
DATA1
4
Blue
DATA2 +
5
Blue/ White
DATA2
6
Green
DATA1 -
7
Brown/ White
DATA3
8
Brown
DATA3 -
Pin
TIA/EIA-568B
Wire color
Digital RGB
1
Orange/ White
RX +
2
Orange
RX -
3
Green/ White
TX +
4
Blue
N/C
5
Blue/ White
N/C
6
Green
TX -
7
Brown/ White
N/C
8
Brown
N/C
Distribution:
PureLink GmbH
Available from B2B Online Portal