PUREGLOW XPG170, Инструкция по установке и обслуживанию, Страница: 6 / 16

6
SECTION 4: IMPORTANT INFORMATION
To avoid risk of explosion, never throw batteries into a fire or expose batteries to any
strong heat sources.
DO NOT SWALLOW. If a battery is swallowed you should seek immediate medical
attention.
DO NOT dispose of this battery in your normal household waste; once the battery has
reached the end of it’s life it should be taken to a recycling centre.
Please contact your local authority for details of recycling schemes in your area.
SAFETY CUT- OUT
The heating element is fitted with a cut-out which will switch the fire off if it overheats.
Should this occur follow the points below:
1. Switch the fire off at the wall outlet
2. Ensure that there are no obstructions in or around the air inlet see Fig 1
3. After approximately 5 minutes switch the fire on.
(The thermal cut-out will take approximately 5 minutes to reset once activated—do not
switch the fire on until the above checks have been completed.
4. If the fault persists contact your retailer or Pure Glow Ltd Customer Service on the
telephone numbers provided at the beginning of these instructions.
SECTION 5: FITTING THE CASTINGS
FITTING THE FASCIA CASTING & ASHPAN
The fascia castings are attached to the fire with 4 magnets; these magnets are positioned
on the mounting rails located on the rear of the casting as shown in Fig 2 below.
MAGNETS
Fig.2
MAGNETS