If you try the bot after the short run time - and it requires an additional charge to run again - the
battery may be defective.
You can submit a parts request on our website www.pyleusa.com for a replacement battery.
Other Troubleshooting:
NO.
Problem
Solution
1
The robot backs off
the charger by itself.
This is normal.
The robot will back off the charger after receiving a full charge.
This prevents overcharging and helps to extend the lifetime of
the battery.
2
My robot keeps
getting stuck!
1)
Check for and clear the room for any obstacles like loose
wires, thick carpets or low hanging drapes that can
hinder the robot
’
s performance.
2)
Follow the cleaning procedures to ensure none of the
parts have gotten jammed full of debris.
3
The brushes don
’
t
spin or my robot is
turning funny
directions.
Follow the cleaning procedures outlined.
4
My robot is not
returning to the
charging dock
1)
Check for and clear the room for any obstacles like loose
wires, thick carpets or low hanging drapes that can keep
the robot from finding the dock.
2)
Make sure the charging dock is positioned correctly as
outlined.
Safety Precautions:
Caution
No one can disassemble, maintain or change
this product except the maintenance technicians
designated by our company, or it may cause fire,
electric shock or personal injury.
Don’t use any other charger but the one
equipped for the robot, or it may cause
product damage, electric shock or fire due to
high voltage.
Don’t touch the appliance's high-voltage power
cord with your wet hand, or it may cause
electric shock.
Robot is not designed for thick shag carpets.
Don’t twist your clothes or any part of your
body (head, finger, etc.) into the brush or wheel
Don’t approach the robot with cigarettes,
lighters, matches and other sources of heat or
