OPERATING INSTRUCTIONS
Press this button to switch the unit into continuous mode.
Pressing the drain pump button will remove water from the pump reservoir, so the unit can
be safely moved or stored.
CONTINUOUS
DRAIN PUMP
c
P
Cont.
will appear on the display to indicate continuous mode.
Press the power key to turn the machine on.
START THE MACHINE
Use the up and down arrow keys to adjust your desired setpoint (typically 50-55%).
ADJUST SETTINGS
Press the power key again and the machine will stop. Note the fan will continue to operate
for 1 minute after the unit has turned off. NOTE: Do not disconnect the power cord to force
unit to stop. Always use the power button.
STOP THE MACHINE
During normal operation, the PureAiro DSC 90S will automatically drain by the force of
gravity. If you want to move or store the machine, wait at least 10 minutes to allow machine
to completely defrost, then lean gently towards drain to ensure unit is completely drained.
WATER DRAINAGE
PUREAIRO DSC 90ES DIAGRAM
REMOTE CONTROL INSTRUCTIONS
Sentinel Dehumidifiers can be controlled using an optional remote accessory.The Sentinel
Remote Control connects to your Sentinel Series Dehumidifier via a 25' CAT 5 cable. The
remote control contains an integrated sensor which gives you multiple options for remotely
controlling your unit, in addition to monitoring the conditions surrounding the dehumidifer.
One application for the remote control is to install the dehumidifier in one room with the
conditioned air ducted into a second room that contains the remote. For example, the
dehumidifier could be installed in a laundry room and ducted into a living room. The remote
would then be mounted in the living room so the remote sensor can control the humidity and
provide easy controls for the user.
Another useful application for the remote control is if the dehumidifier is in area that's
difficult to access on a regular basis. For instance, if your dehumidifier is installed in your
crawl space, the remote could be mounted in your living space or garage. This provides you
with an easy way to monitor the dehumidifier.
NOTE: Symbols indicated below will only appear when the dehumidifier is powered on.
Press the on/off button and the
machine will start running (two
beeps). Press the button again to
turn the machine off.
Use the Up and Down arrow
buttons to adjust the humidity
level.
ON/OFF (POWER)BUTTON
UP BUTTON▲ /
DOWN BUTTON
Use the Mode button to switch
between dehumidification and a
ducted application.
MODE
The
symbol on the display board
indicates the sensor on the remote
control is being utilized.
The
symbol on the display board indicates the sensor on the dehumidifier is being utilized.
TEMPERATURE
Press the temperature button to display the current temperature on the screen. Press the
button again to turn off the display.
1
2
3
M
4
T
5
6
NOTE: THIS FUNCTION IS ONLY AVAIL .ABL E ON THE PureAiro DSC 90S MODEL.
1
2
3
4
DRAIN PUMP
MODE
LCD MONITOR
CONTINUOUS
TEMPERATURE
DOWN BUTTON
UP BUTTON
ON/OFF
06
07
Front View
HANDLE
POWER CORD
UNIT COVER
INLET END CAP
AIR INTLET GRILLE
DRAIN HOSE
PureAiro
DSC 90S
