06
07
PureAiro
DSC 120ES
OPERATING INSTRUCTIONS
Press the power key to turn the machine on.
START THE MACHINE
Use the up and down arrow keys to adjust your desired setpoint (typically 50-55%).
ADJUST THE SETTINGS
Press the power key again and the machine will stop. Note the fan will continue to operate
for 1 minute after the unit has turned off.
DO NOT DISCONNECT THE POWER CORD TO FORCE THE UNIT TO STOP.
STOP THE MACHINE
The PureAiro DSC 120ES has an integrated condensate pump. During normal operation,the
DSC 120ES will automatically drain as required.
WATER DRAINAGE
1
2
3
4
NOTE: The symbols indicated below only show when the remote is powered on.
Press the on/off button and the machine will
start running (one beep). Press the button
again to the turn the machine off.
Use the Up and Down arrow buttons to adjust
the humidity level.
ON/OFF (POWER)BUTTON
UP BUTTON▲ / DOWN BUTTON
Use the Mode button to switch between
dehumidification and a ducted application.
MODE
The
symbol on the display board indicates
the sensor on the remote control is being
utilized.
The
symbol on the display board indicates the sensor on the dehumidifier is being utilized.
TEMPERATURE
Press the temperature button to display the current temperature on the screen.
1
2
3
M
4
DRAIN PUMP
MODE
LCD MONITOR
CONTINUOUS
TEMPERATURE
DOWN BUTTON
UP BUTTON
ON/OFF
Press this button to switch the unit into continuous mode. “CONT.” will appear on the display
screen.
Use this button if the unit will not be used for an extended period of time.
This button will remove water from the pump reservoir.
CONTINUOUS
DRAIN PUMP
5
6
UNIT DIAGRAM
Front View
HANDLE
SIDE PANEL
CONTROL PANEL
PRE-FILTER
Back View
REMOTE CONTROL
DRAIN HOSE
CONNECTION
AUXILIARY TERMINALS
VENTILATION FAN PORT
(OPTIONAL)
POWER CORD
DISCHARGE GRILLE
