24
Help and specifications
Hints and tips
I cannot connect to my wireless network
Ensure that your Contour is within range of your wireless router and that you are not
located in a dead spot.
The Status LED is flashing white
Your Contour has AirPlay selected as the source but does not currently have a
connection to a network. See ‘Network setup’ on page 8 for more information.
The Status LED is flashing cyan
If the Status LED is flashing cyan, Contour has a firmware error. Contact Pure
technical support for assistance.
The audio and network connection keeps dropping when using Wi-Fi
If using an iPhone, iPod touch or iPad, make sure you’re running the latest version
of iOS. Your Wi-Fi may be congested by other networks on the same or close by
channels. Consult your router documentation or contact Pure support.
Technical specifications
Dock compatibility
Supports most iPod, iPhone and iPad models. For the latest
information, check the compatibility table on our website:
www.pure.com/apple-compatibility.
Speakers
2 full-range 3.5" drive units with twin downward firing bass ports.
Audio output
2 x 18W RMS.
Input connectors
18V DC, 3.61A power adapter socket. iPod/iPhone/iPad
connector. 3.5mm Aux-in for auxiliary devices. Ethernet socket.
Output connectors
Digital coaxial socket for digital audio.
Remote control
Infrared remote control. CR2025 button cell battery included.
Mains power supply
100-240V, 50/60Hz 18V DC, 3.61A external power adapter.
Dimensions
371mm wide x 229mm high x 190mm deep.
Approvals
CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at
http://www.pure.com/about/r-tte-doc.
ETSI EN 300 401 compliant.
Australian C-Tick N1600 and Electrical Safety.
